Without Scan Tool
HOW TO READ AND ERASE DIAGNOSTIC TROUBLE CODESRequired Special Tool:
^ MB991529: Diagnostic Trouble Code Check Harness
HOW TO ERASE DIAGNOSTIC TROUBLE CODES
1. Use special tool MB991529 to ground number 1 terminal of the data link connector.
2. Depress the brake pedal and hold it.
3. Turn the ignition switch to the ON position.
4. After turning the ignition switch to the ON position, release the brake pedal within three seconds. Repeat this process of pressing and releasing the brake pedal 10 continuous times.
5. Turn the ignition switch to the LOOK (OFF) position.
6. Disconnect special tool MB991529.