Shift Interlock: Service and Repair

REMOVAL AND INSTALLATION

CAUTION: When removing and installing the shift lock cable unit, be careful not to hit the SRS-ECU.

INSTALLATION SERVICE POINTS
>>A<< SHIFT LOCK CABLE UNIT INSTALLATION





1. Selector lever to "P" position.
2. Turn the ignition key to "LOCK" (OFF) position.
3. Install the shift lock cable unit rod to the selector lever assembly lock cam, and tighten the shift lock cable unit installation bolt to the specified torque.
Tightening torque: 5.0 ± 1.0 Nm (44 ± 9 inch lbs.)
4. Check the selector lever operation.

INSPECTION
Check the cable assembly for function and for damage.