Differential Mount Bracket Bushing Replacement

Required Special Tool:
^ MB990883:Rear Suspension Bushing arbor





1. Use the special tool MB990883 to remove or install the bushing.
2. Press-fit the bushing with its hollow portion facing in the direction shown.
3. Press-fit the bushing until the bushing outer case end face is flush with the differential mount bracket.


Required Special Tools:
^ MB990984: Mount Bushing Arbor





1. Use the special tool MB990984 to remove or install the bushing.
2. Press-fit the bushing with its marks facing in the direction shown.
3. Press-fit the bushing until the bushing outer case end face is flush with the differential support arm.