Front Door Window Regulator: Service and Repair
DOOR GLASS AND REGULATORDoor Glass And Regulator:
Required Special Tools:
- MB990480: Window Glass Holder
- MB991223: Harness Set
REMOVAL SERVICE POINT
[[A]] WINDOW REGULATOR ASSEMBLY/POWER WINDOW MOTOR ASSEMBLY REMOVAL
1. Remove the door window glass installation bolts.
CAUTION: If tinting film is adhered to the door window glass, attach special tool MB990480 to the outside of the glass to prevent the film from peeling off.
2. Lift the door window glass, and attach special tool MB990480 to the glass as shown to prevent the glass from falling.
3. Remove the window regulator assembly and power window motor assembly.
INSTALLATION SERVICE POINTS
]]A[[ GLASS HOLDER/DOOR WINDOW GLASS INSTALLATION
1. Install the glass holder to the door window glass as shown.
Standard value
(A): 335.6 mm (13.2 inch)
(B): 122 mm (4.8 inch)
(C): 375.2 mm (14.8 inch)
(D): 348.7 mm (13.7 inch)
(E): 122 mm (4.8 inch)
(F): 249.1 mm (9.8 inch)
2. Install the glass to the window regulator assembly.
]]B[[ WINDOW REGULATOR ASSEMBLY INSTALLATION
When installing the window regulator assembly, tighten the bolts to the specified torque in the order shown.