Inspection Procedure 24

INSPECTION PROCEDURE 24: No Sound (CD Only)

DIAGNOSIS

STEP 1 Check again using another CD, which is not dirty or scratched

Q: When you substitute another normal CD, is the CD played normally?

YES: The original CD is defective The CD player should sound normally

NO: Go to Step 2

STEP 2 Check power supply to the CD player when the ignition switch is at "ACC" or "ON" position

Q: Is the radio and CD player energized when the ignition switch is turned to the "ACC" or "ON" position?

YES: Replace the radio and CD player or radio, CD player and CD changer The CD player should sound normally

NO: Check the memory backup power supply circuit Refer to Inspection Procedure 1