Inspection Procedure 2

INSPECTION PROCEDURE 2: When the Selector Lever is Moved to "N" Range, Auto-cruise Control is not Cancelled.

COMMENT
The transmission range switch circuit is suspected.

TROUBLESHOOTING HINTS (THE MOST LIKELY CAUSES FOR THIS CASE:)
- Malfunction of the transmission range switch.
- Damaged harness or connector.
- Malfunction of the PCM.

DIAGNOSIS
Refer to A/T Diagnosis - Diagnostic Trouble Code Procedures - DTC 27: Transmission Range Switch System (Open Circuit), DTC 28: Transmission Range Switch System (Short Circuit) in Transmission Control System/Testing/Trouble Code Diagnostic Charts.