Removal and Installation
REMOVAL AND INSTALLATIONPre-removal & Post-installation Operation:
Removal Steps 1-11:
WARNING: When removing and installing the heater unit, do not let it bump against the SRS-ECU or the components.
REMOVAL SERVICE POINT
<> FLEXIBLE SUCTION HOSE AND LIQUID. PIPE B DISCONNECTION
CAUTION: As the compressor oil and receiver are highly moisture absorbent, use a non-porous material to plug the hose and nipples.
To prevent the entry of dust or other foreign bodies, plug the dismantled hose and the nipples of the expansion valves.