Removal and Replacement
KNOCK SENSORRemoval Steps 1-4:
REMOVAL AND INSTALLATION <2.4L ENGINE>
CAUTION: When the knock sensor replacement is performed, use scan tool MB991958 to initialize the learning value (Refer to Initialization Procedure for Learning Value in MFI Engine).
Required Special Tool:
MD998773: Knock Sensor Wrench
REMOVAL SERVICE POINT
<> KNOCK SENSOR REMOVAL
Use special tool MD998773 to remove the knock sensor.
INSTALLATION SERVICE POINT
>>A<< KNOCK SENSOR INSTALLATION
Use special tool MD998773 to install the knock sensor.