Seat Occupant Sensor: Service and Repair

OCCUPANT CLASSIFICATION SENSOR

REMOVAL AND INSTALLATION
For disassembly and assembly of the front seat assembly, refer to Front Seat assembly.

INSPECTION

WARNING: If a dent, crack, deformation or rust is detected, replace with a new seat slide adjuster.

NOTE: For checking of the occupant classification sensor other than described below, refer to the section concerning SRS diagnosis. Diagnostic Trouble Code Descriptions

1. Check the occupant classification sensor for dent, cracks or deformation.
2. Check the connector for damage, and terminals for deformation.
3. Check that there is no bending or corrosion in the seat slide adjuster.
4. Carry out the accuracy check of occupant classification sensor.