Front Door Panel: Service and Repair

DOOR TRIM

REMOVAL AND INSTALLATION

Removal Steps 1-8:

REMOVAL SERVICE POINTS

[[A]] INSIDE HANDLE COVER CAP REMOVAL






Insert a flat-tipped (-) screwdriver as shown in the figure to remove the inside handle cover cap.

[[B]] FRONT/REAR DOOR TRIM REMOVAL






1. Insert a flat-tipped (-) screwdriver as shown in the figure to remove the door trim cap.






Using a flat-tipped (-) screwdriver as shown in the figure, remove the inside lock cable and the inside handle cable, then remove the door trim.

INSTALLATION SERVICE POINTS

]]A[[ FRONT DOOR SASH TRIM INSTALLATION






Install it with the clip attached as shown in the figure.

]]B[[ FRONT DOOR/REAR DOOR TRIM INSTALLATION
After the power window switch is installed or replaced, perform learning of the power window fully-closed position.