Headlamp: Service and Repair
Removal Step 1-8:
REMOVAL AND INSTALLATION
REMOVAL SERVICE POINTS
<> HEADLIGHT ASSEMBLY REMOVAL
When removing the headlight assembly of the right side, remove the washer fluid inlet.
<> BULB REMOVAL
CAUTION: Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty,immediately clean it with alcohol or thinner. After drying completely, install the bulb.
1. Twist the socket cover to remove.
2. Disconnect the igniter.
3. Release the bulb securing spring, and remove the bulb.