Height Sensor Check

HEIGHT SENSOR CHECK

FRONT HEIGHT SENSOR CHECK




1. Disconnect the sensor connector and connect the special tool test harness (MB991658) as shown.
2. Turn the ignition switch to the ON position.
3. Measure the voltage of sensor connector terminal No. 2.




4. Check that voltages show the values described in the graph according to the sensor operation angle.

REAR HEIGHT SENSOR CHECK




1. Disconnect the sensor connector and connect the special tool test harness (MB991658) as shown.
2. Turn the ignition switch to the ON position.
3. Measure the voltage of sensor connector terminal No. 2.




4. Check that voltages show the values described in the graph according to the sensor operation angle.