F4A4B
DIFFERENTIALDISASSEMBLY AND REASSEMBLY
CAUTION: Refer to "HOW TO USE THIS MANUAL" for the symbols in the schematic.
Disassembly Steps 1-4:
DISASSEMBLY SERVICE POINT
<> DIFFERENTIAL SIDE BEARING REMOVAL
1. Break and remove the roller of the tapered roller bearing.
2. Using the Special Tool, remove the inner race of differential side bearing (transmission case side) from the differential sub-assembly.
^ Rear Axle Bearing Puller (MB990801)
^ Side Bearing Puller Cap (MB990811)
^ Needle Bearing Installer (MB990956)
<> DIFFERENTIAL SIDE BEARING REMOVAL
Using the Special Tool, remove the inner race of differential side bearing (converter housing side) from the differential sub-assembly.
^ Side Bearing Puller (MB990810)
^ Claw (MD999566)
^ Cam Oil Seal Installer (MD998761)
REASSEMBLY SERVICE POINT
>>A<< DIFFERENTIAL GEAR BEARING INSTALLATION
CAUTION:
^ Do not re-use the inner race.
^ Replace the inner race together with the outer race.
Using the Special Tool, Bearing Installer (MB992213), install the inner race of reduction gear bearing (converter housing side) on the reduction gear subassembly.
^ Installer Cap (MD998812)
^ Installer-100 (MD998813)
^ Installer Adapter (MD998826)
^ Cam Oil Seal Installer Adapter (MB991559)
^ Bearing Installer (MB992213)
>>B<< DIFFERENTIAL GEAR BEARING INSTALLATION
CAUTION:
^ Do not re-use the inner race.
^ Replace the inner race together with the outer race.
Using the Special Tools, install the inner race of reduction gear bearing (transmission case side) on the reduction gear sub-assembly.
^ Installer Cap (MD998812)
^ Installer-100 (MD998813)
^ Oil Seal Installer (MB992150)
>>C<< DIFFERENTIAL FINAL GEAR INSTALLATION
CAUTION:
^ The differential sub-assembly can be only assembled, but not disassembled.
^ Assemble the final gear to the differential assembly in the chamfer direction in the inside diameter of the final gear.
^ Tighten bolts diagonally.
Install the final gear on the differential assembly. Refer to the table or the exploded view for tightening torque.
