Transfer Oil
13. TRANSFER OILChecking transfer oil level
1. Remove the oil filler plug.
2. Check that the oil level is just below the lower edge of the oil filler plug hole.
3. Check that the oil is not excessively foul and has moderate viscosity.
4. Install the oil filler plug and tighten to the specified torque.
Tightening torque: 32 ± 2 Nm (23 ± 2 ft-lb)
Change transfer oil
1. Remove the oil drain plug to drain the transfer oil.
2. Install the oil drain plug and tighten to the specified torque.
Tightening torque: 32 ± 2 Nm (23 ± 2 ft-lb)
3. Remove the oil filler plug and fill the transfer oil up to the lower edge of the oil filler plug hole.
Brand name: Hypoid gear oil API classification GL-5 SAE 90
Filling amount: 0.53 dm3(0.56 quarts)
4. Install the oil filler plug and tighten to the specified torque.
Tightening torque: 32 ± 2 Nm (23 ± 2 ft-lb)