Seats: Testing and Inspection
INSPECTIONCONTINUITY TEST OF HEATED SEAT SWITCH
Continuity Test Of Heated Seat Switch:
1. Check for continuity between terminals.
2. Check that the indicator is lighted at HI or LO when battery voltage is supplied to terminal 5 and terminal 8 is grounded.
3. Check that indicator is lighted when battery voltage is supplied to terminals 2 and terminal 6.
SEAT CUSHION HEATER CHECK
Seat Cushion Heater Check:
Measure the resistance between terminals.
Standard value: At room temperature 20°C (68°F)
Between heated seat assembly terminals 1 and seat-back heater terminal 1: 3.84 ± 4.69 Ohms
Between heated seat assembly terminals 2 and seat-back heater terminal 1: 0.14 ± 0.18
SEATBACK HEATER CHECK
Seatback Heater Check:
Measure the resistance between terminals.
Standard value: At room temperature 20°C (68°F)
Between terminals 1 and terminal 2: 5.40 ± 6.60 Ohms
HEATED SEAT RELAY CONTINUITY CHECK
Heated Seat Relay Continuity Check:
