Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Lancer Evolution L4-2.0L Turbo (4B11T/C) >> Repair and Diagnosis >> Body and Frame >> Specifications >> Loose Panel
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Loose Panel

LOOSE PANEL

REMOVAL AND INSTALLATION

CAUTION:
- Disconnect the battery (-) terminal and wait for 60 seconds or more before starting work. Insulate the disconnected (-) terminal by wrapping the tape. (Refer to SRS - Service precautions)
- Handle the front impact sensor with sufficient caution, and do not drop the sensor or allow contact with water, oil, or others. If a dent, crack, deformation, and others are discovered, replace it with a new one.

Removal Steps 1-5:






REMOVAL SERVICE POINT

]]A[[ HEADLIGHT SUPPORT UPPER PANEL REMOVAL






Remove the harness clamps and bolts shown in the illustration, and then remove the headlight support upper panel.

INSTALLATION SERVICE POINT

[[A]] HEADLIGHT SUPPORT UPPER PANEL INSTALLATION






After installing the headlight support upper panel, tighten the bolts shown in the illustration to the specified torques.

Removal Steps 1-11:




pro multis · About Operation CHARM