Heater Core: Service and Repair
HEATER UNIT AND BLOWER ASSEMBLYWARNING:
- Before removing the front seat assembly, refer to Air Bag System Service Precautions and Airbag Module and Clock Spring , Airbag System Service and Repair.
- When removing and installing the front passenger seat, be sure to carry out accuracy check occupant classification sensor after the seat has been installed in the vehicle. (Refer to On-Vehicle Service).
Pre-removal & Post-installation Operation:
Removal Steps 1-8:
REMOVAL SERVICE POINTS
[A]SUCTION PIPE AND LIQUID PIPE DISCONNECTION
CAUTION: As the compressor oil and receiver are highly moisture absorbent, use a non-porous material to plug the hose and nipples.
To prevent the entry of dust or other foreign bodies, plug the dismantled hose and the nipples of the expansion valves.
[B]FRONT DECK CROSSMEMBER ASSEMBLY REMOVAL
Disconnect the following connectors to gain access to the front deck crossmember.
