Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Lancer Evolution L4-2.0L Turbo (4B11T/C) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Testing and Inspection

IGNITION COIL AND IGNITION POWER TRANSISTOR

Required Special Tools:
- MB991658: Test Harness
- MB992110: Power Plant ECU Check Harness

Measurement Method




1. Disconnect the ignition coil connector, and connect test harness special tool (MB991658) between the separated connector. (All terminals should be connected.)
2. Connect the oscilloscope probe to ignition coil connector terminal No. 2.

Alternate method




1. Disconnect all ECM connectors. Connect the check harness special tool (MB992110) between the separated connectors.




2. Connect the oscilloscope probe to each check harness connector terminal to analyze each cylinder:
- Terminal No. 4 for the number 1 cylinder.
- Terminal No. 5 for the number 2 cylinder.
- Terminal No. 20 for the number 3 cylinder.
- Terminal No. 21 for the number 4 cylinder.









Wave Pattern Observation Points
Point: The power transistor control signal (ignition timing) is advanced when the engine speed is increased.






Examples of Abnormal Wave Patterns

Example 1 (Wave pattern during engine cranking)






- Cause of problem
Open-circuit in ignition primary circuit

- Wave pattern characteristics
Voltage value is too low.
pro multis · About Operation CHARM