Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Outlander 2WD L4-2.4L (4B12) >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Oil Pump, Engine
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pump, Engine

BALANCER SHAFT AND OIL PUMP MODULE





Tighten the balancer shaft and oil pump module bolts to the specified torque 20 Nm (15 ft-lb) in the order of number shown in the figure.

Tighten the balancer shaft and oil pump module bolts again to the specified torque 44 Nm (33 ft-lb) in the order of number shown in the figure.

Loosen the balancer shaft and oil pump module bolts fully in the reverse sequence to that shown.

Tighten the balancer shaft and oil pump module bolts to the specified torque 20 Nm (15 ft-lb) in the order of number shown in the figure.








After tightening to the specified torque, tighten the balancer shaft and oil pump module bolts to 135°, using special tool MB991614, in the order of number shown in the figure.
pro multis · About Operation CHARM