Engine Roll Stopper and Center Member
ENGINE ROLL STOPPER AND CENTERMEMBERREMOVAL AND INSTALLATION
CAUTION:
^ *1: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine and transaxle assembly on the vehicle body.
^ *2: Indicates parts are the bolts with friction coefficient stabilizer. In removal, ensure there is no damage, clean dust and soiling from bearing and thread surfaces, and tighten them to the specified torque.
Pre-removal & Post-installation Operation:
Removal Steps 1-4:
Front roll stopper and centermember removal steps
1. Front roll stopper and centermember assembly
2. Centermember ]]A[[
3. Front roll stopper
Rear roll stopper removal steps
4. Rear roll stopper
INSTALLATION SERVICE POINT
]]A[[ FRONT ROLL STOPPER INSTALLATION
Install the front roll stopper so that the hole faces toward the vehicle front.