Transfer
TRANSFERDISASSEMBLY AND ASSEMBLY
Disassembly Steps 1-7:
Required Special Tools:
^ MD998812: Installer cap
^ MB992154: Oil seal installer
^ MB992075: Handle
^ MB992142: Oil seal installer
^ MB990936: Installer adapter
ASSEMBLY SERVICE POINT
]]A[[ COVER INSTALLATION
1. Apply a 1.5 mm diameter bead of sealant as illustrated onto the cover.
3M (TM) AAD Part No.8660 or equivalent
2. Attach the cover to the transfer and tighten it to the specified torque.
Tightening torque: 9.0 ± 2.0 Nm (80 ± 17 in-lb)
]]B[[ OIL SEAL INSTALLATION
Using the special tool MD998812 and MB992154, install the oil seal.
NOTE: Apply grease to the lip of oil seal.
]]C[[ OIL SEAL INSTALLATION
Using the special tool MB992075 and MB992142, install the oil seal.
NOTE: Apply grease to the lip of oil seal.
]]D[[ OIL SEAL INSTALLATION
Using the special tool MB990936, install the oil seal.
NOTE: Apply Hypoid gear oil to the lip of oil seal.