Keyless Entry Transmitter: Service and Repair
KEYLESS OPERATION KEYDISASSEMBLY AND ASSEMBLY
Post-installation Operation:
Disassembly Steps 1-5:
DISASSEMBLY SERVICE POINTS
[[A]] EMERGENCY KEY REMOVAL
Move the lever on the lower cover to the direction shown by the arrow to remove the emergency key from the keyless operation key.
[[B]] UPPER COVER REMOVAL
CAUTION: Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
Set a flat-tipped screwdriver wrapped with protective tape as shown in the figure, and pry off the keyless operation key.
ASSEMBLY SERVICE POINT
]]A[[ BATTERY INSTALLATION
CAUTION: Do not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
Install a battery with the positive side facing toward the lower cover.
Replacement battery: Coin-type lithium battery CR2032