Front Door Panel: Service and Repair

DOOR TRIM

REMOVAL AND INSTALLATION

Removal Steps 1-13:

REMOVAL SERVICE POINTS

[[A]] INSIDE HANDLE COVER CAP REMOVAL






Insert a flat-tipped (-) screwdriver as shown in the figure to remove the inside handle cover cap.

[[B]] DOOR TRIM CAP REMOVAL






Insert a flat-tipped (-) screwdriver as shown in the figure to remove the door trim cap.

[[C]] FRONT/REAR DOOR TRIM REMOVAL






Using a flat-tipped (-) screwdriver as shown in the figure, remove the inside lock cable and the inside handle cable, then remove the door trim.

INSTALLATION SERVICE POINTS

]]A[[ POWER WINDOW SWITCH INSTALLATION

After the power window switch is installed or replaced, perform learning of the power window fully-closed position (Refer to Body - Door Glass and Regulator).

]]B[[ FRONT DOOR SASH TRIM INSTALLATION






Install it with the clip attached as shown in the figure.