Trunk / Liftgate Handle: Service and Repair

LIFTGATE HANDLE AND LATCH

REMOVAL AND INSTALLATION [LIFTGATE UPPER]

Post-installation Operation:

Removal Steps 1-4:

INSTALLATION SERVICE POINT

]]A[[ STRIKER INSTALLATION






Install the striker so that the striker center does not deviate more than ±1.5 mm (0.06 inch) from the latch center.

REMOVAL AND INSTALLATION [LIFTGATE LOWER]

Post-installation Operation:

Removal Steps 1-5:

INSTALLATION SERVICE POINTS

]]A[[ LIFTGATE WEATHERSTRIP INSTALLATION






1. The marking on the liftgate weatherstrip should be positioned at the center of the liftgate lower.
2. Install according to the order shown in the figure.
3. Install according to the direction shown by the arrow in the figure.

]]B[[ STRIKER INSTALLATION






Install the striker so that the striker center does not deviate more than ±1.5 mm (0.06 in) from the latch center.