Front Seat

FRONT SEAT ASSEMBLY

REMOVAL AND INSTALLATION

CAUTION: To remove the front seat assembly of vehicle with side air bag, refer to SRS - Service Precautions and Curtain Air Bag Module.

Removal Steps 1-4:

REMOVAL SERVICE POINTS

[[A]] WIRING HARNESS CONNECTOR DISCONNECTION
Disconnect the following wiring harness connectors:









INSTALLATION SERVICE POINTS

]]A[[ FRONT SEAT ASSEMBLY INSTALLATION.






1. Confirm that both the seat slides are locked, and then temporarily tighten all the bolts shown in the figure so that no load is applied to the front seat cushion.
2. Tighten all the bolts to the specified torque.