Component Tests and General Diagnostics
INJECTOR CHECKRight bank side (number 1, 3, 5 cylinders)
1. Disconnect the intermediate connector B-21.
2. Measure the resistance between the injector intermediate connector terminals.
3. Connect the injector intermediate connector.
Left bank side (number 2, 4, 6 cylinders)
1. Disconnect the injector connector.
2. Measure the resistance between injector side connector terminals 1 and 2.
Standard value: 10.5 - 13.5 ohms [at 20 °C (68 °F)]
3. Connect the injector connector.