Differential
DIFFERENTIALDISASSEMBLY AND ASSEMBLY
Disassembly Steps 1-4:
Required Special Tools:
^ MB990810: Side bearing puller
^ MB991452: Oil seal installer
^ MD998812: Installer cap
^ MD998813: Installer-100
^ MD998823: Installer adapter (48)
^ MB992138: Bearing Installer
DISASSEMBLY SERVICE POINT
[[A]] DIFFERENTIAL SIDE BEARING REMOVAL
Using the special tool MB990810, remove the inner race of differential side bearing (transaxle case side) from the differential sub-assembly.
[[B]] DIFFERENTIAL SIDE BEARING REMOVAL
Using the special tools MB990810 and MB991452 [W1CJA], remove the inner race of differential side bearing (converter housing side) from the differential sub-assembly.
REASSEMBLY SERVICE POINT
]]A[[ DIFFERENTIAL SIDE BEARING INSTALLATION
CAUTION:
^ Do not re-use the inner race.
^ Replace the inner race together with the outer race.
Using the special tool MD998812, MD998813 and MD998823 [F1CJA] or MB992138 [W1CJA], install the inner race of reduction gear bearing (converter housing side) on the reduction gear sub-assembly.
]]B[[ REDUCTION GEAR BEARING INSTALLATION
CAUTION:
^ Do not re-use the inner race.
^ Replace the inner race together with the outer race.
Using the special tools MD998812, MD998813 and MD998823, install the inner race of reduction gear bearing (transaxle case side) on the reduction gear sub-assembly.
DIFFERENTIAL INSPECTION
DIFFERENTIAL SUB-ASSEMBLY
Measure the inner race press-fit shaft diameter of differential sub-assembly, and replace the assembly if the diameter does not meet the standard value.
Standard values
^ Converter housing side [F1CJA] ([diameter] 40.026 - 40.051 mm ([diameter] 1.5758 - 1.5768 in)
^ Converter housing side [W1CJA] ([diameter] 60.032 - 60.078 mm ([diameter] 2.3635 - 2.3653 in)
^ Transaxle case side ([diameter] 40.026 - 40.051 mm ([diameter] 1.5758 - 1.5768 in)