Crankshaft Main Bearing

CRANKSHAFT








Install the bedplate retaining bolts, making sure to place the stud bolts in the correct location, Torque the bolts in the sequence shown.
^ Hand tighten bolts 1D, 1G and 1F until the bed-plate contacts the block.
^ Tighten bolts 1A-1 54 Nm (40 ft. lbs.)
^ Tighten bolts 1-8 7 Nm (62 in. lbs.)
^ Turn bolts 1-8 an additional 90°
^ Tighten bolts A-E 27 Nm (20 ft. lbs.)