Transaxle Oil Replacement

TRANSAXLE OIL REPLACEMENT





1. Remove the filler plug and gasket.
2. Remove the drain plug and gasket, and drain the oil.
3. Tighten the drain plug and new gasket, to the specified torque.
Tightening torque: 49 ± 19 Nm (37 ± 14 ft-lb)
4. Fill with DiaQueen NEW MULTI GEAR OIL API classification GL-3, SAE 75W-80 until the level comes to the lower portion of filler plug hole.
Quantity: 2.5 dm3 (2.6 quarts)





5. Tighten the filler plug and new gasket to the specified torque.
Tightening torque: 49 ± 19 Nm (37 ± 14 ft-lb)