Front Door Panel: Service and Repair

REMOVAL AND INSTALLATION









REMOVAL SERVICE POINTS

[[A]] INSIDE HANDLE COVER CAP REMOVAL





Insert a flat-tipped (-) screwdriver as shown in the figure to remove the inside handle cover cap.

[[B]] DOOR TRIM CAP REMOVAL





Insert a flat-tipped (-) screwdriver as shown in the figure to remove the door trim cap.

[[C]] FRONT/REAR DOOR TRIM REMOVAL





Using a flat-tipped (-) screwdriver as shown in the figure, remove the inside lock cable and the inside handle cable, then remove the door trim.

INSTALLATION SERVICE POINTS

]]A[[ POWER WINDOW SWITCH INSTALLATION

After the power window switch is installed or replaced, perform learning of the power window fully-closed position Service and Repair).

]]B[[ FRONT DOOR SASH TRIM INSTALLATION





Install it with the clip attached as shown in the figure.