Doors: Service and Repair

REMOVAL AND INSTALLATION

















REMOVAL SERVICE POINTS

[[A]] DOOR BELTLINE MOULDING REMOVAL





Pry the door beltline moulding clip positions with a flat-tipped screwdriver and remove the door beltline moulding upward.

[[B]]DOOR OPENING WEATHERSTRIP OUTER REMOVAL





Make the tool as shown in the figure, and remove the weatherstrip from the door panel.

INSTALLATION SERVICE POINTS

]]A[[ DOOR TAPE INSTALLATION





Apply the specified adhesive to the water-proof film as shown in the figure and stick the film.

]]B[[ WATERPROOF FILM INSTALLATION





CAUTION:
When a waterproof film is applied, guide the butyl rubber tape under the inner panel drain hole.

Apply the specified adhesive to the water-proof film as shown in the figure and stick the film.
Butyl rubber tape: 3M(TM) AAD Part number 8633 or equivalent