Removal and Replacement

REMOVAL AND INSTALLATION

The following bolts and screws are used for installing the instrument panel: The bolts and screws are indicated by symbols in the illustrations in sections "REMOVAL AND INSTALLATION" and "DISASSEMBLY AND ASSEMBLY."






CAUTION:

- For the removal of the front passenger's air bag module, refer to Service Precautions Service Precautions, Driver's and Front Passenger's Air Bag Module, and Clock Spring Removal and Installation before operation.

- Do not subject SRS-ECU to any shocks when removing or installing the instrument panel.









CLIP AND CLAW POSITIONS





NOTE:
Each number in the illustration indicates a part number.

REMOVAL SERVICE POINTS





[[A]]
GLOVE BOX LOCK CYLINDER REMOVAL

While pulling the lever as shown in the figure, press in the lock plate of the glove box lock cylinder (brass-colored portion) using a flat-tipped screwdriver and push out the glove box lock cylinder to the direction of the arrow.

NOTE:
Always unlock the glove box lock cylinder before removal because the glove box lock cylinder cannot be removed when it is locked.

INSTALLATION SERVICE POINT





]]A[[
GLOVE BOX LOCK CYLINDER INSTALLATION

1. Set the glove box lock cylinder in the direction shown in the figure, and insert the lock plate to the installation hole of the lever.

2. Press in the glove box lock cylinder.