Sunroof Operation Check

SUNROOF OPERATION CHECK

CAUTION:
Check that the following items are normal before carrying out this operation check:

- Installation condition of the sunroof assembly

- Installation condition, deformation and contamination of the sunroof drive cable

- Installation condition of sunroof lid glass

- Sunroof switch and sunroof motor assembly

Check that the following items. If faulty, replace the sunroof motor assembly.






BASIC OPERATION





SUNROOF TIMER MECHANISM

In cases except the following, the basic operation and jam preventing mechanism will be maintained for thirty seconds after the ignition switch is turned to the "LOCK" (OFF) position
(Sunroof timer function).

- If you open a door within that period (i.e. a door switch is on), the sunroof timer function will be cancelled immediately.

SAFETY MECHANISM

- If any obstacle such as a hand or a head is detected to be pinched during a sunroof lid glass closing operation, the sunroof lid glass is opened by approximately 200 mm (7.9 inches) or more. (Safety mechanism)

- During the sunroof lid glass closing operation, by continuing the sunroof close switch operation, the sunroof can be forcibly closed without activating the safety mechanism even when an obstacle is detected to be pinched.

- During the safety mechanism activation, when the sunroof close switch is operated, the sunroof lid glass stops. By continuing the close switch operation, the sunroof lid glass can be forcibly closed without activating the safety mechanism even when an obstacle is detected to be pinched.