Pinout Values and Diagnostic Parameters

]]


ECM TERMINAL VOLTAGE REFERENCE CHART FOR CRUISE CONTROL SYSTEM OPERATION

Required Special Tool:

- MB992110: Power plant ECU check harness

Use special tool MB992110, check the ECM terminal voltage.





1. Disconnect the all ECM connectors, and connect special tool (MB992110) in between [ Removal and Replacement]
[2.4L Engine]
or [ Removal and Replacement]
[3.0L Engine].
2. Measure the voltages between the check connector terminals of special tool (MB992044) and ground terminals (ECM connector B-11 terminal 81 or 93).