Front Suspension

LOWER ARM BUSHING REPLACEMENT

Required Special Tools:

- MB992119: Arm bushing remover and installer

- MB990979: Ring

- MB990890: Rear suspension bushing base





Replace the back side bushing according to the following procedure.





1. Use the following special tools to remove the bushing:

- MB992119 (Arm bushing remover and installer)

- MB990979 (Ring)

- MB990890 (Rear suspension bushing base)





2. Use the following special tools to press-fit the bushing.

- MB992119 (Arm bushing remover and installer)

- MB990979 (Ring)

- MB990890 (Rear suspension bushing base)
3. Press-fit the bushing so that the bushing protrusion is in the direction shown in the figure.
4. Press-fit the bushing until the special tool contacts with the lower arm assembly.