Side Air Dam

SIDE AIR DAM






REMOVAL SERVICE POINT

A SIDE AIR DAM REMOVAL
Gently lift and remove the side air dam. If there is any double-sided tape remaining on the side air dam, remove according to the following instructions.

Remove double-sided tape remaining on the body surface






1. Attach protection tape all the way along the edges of the double-sided tape which is still adhering to the body.






2. Scrape off the double-sided tape with a resin spatula as much as possible.
3. Peel off the protection tape.
4. Wipe the body surface and clean it with a rag moistened with isopropyl alcohol.

Remove double-sided tape remaining on side air dam and adhere double-sided tape (when re-using side air dam).






1. Scrape off the double-sided tape on the side air dam with a resin spatula as much as possible.
2. Wipe the side air dam surface and clean it with a rag moistened with isopropyl alcohol.
3. Remove only a small portion of the residual adhesive.
4. Adhere the double-sided tape as specified on the side air dam.

INSTALLATION SERVICE POINT

A SIDE AIR DAM INSTALLATION






1. Tear off the double-sided tape backing paper.

NOTE: If attach the adhesive tape to the edge of the backing paper, it will be easy to tear off.

2. Install the side air dam.

NOTE: If the double-sided tape is difficult to affix in cold temperature, etc., warm the bonding surfaces of the body and side air dam to about 40 - 60° C before affixing the tape.

3. Firmly press in the side air dam.