Stiffener and Damp Sheet Application Locations

STIFFENER AND DAMP SHEET APPLICATION LOCATIONS

Spray-type stiffeners on the inner side of the side outer panel, sheet-type stiffeners on the inner side of the liftgate outer panel, and a damp sheet on the interior side of the front deck have been used for higher surface rigidity.

NOTE:
- The spray-type stiffener is mainly made from epoxy resin and contains filler. The sheet-type one is additionally reinforced with glass fiber. The stiffener is cured by heating in the paint drying furnace during the production.
- No spare part of the stiffener for repair is available in the field. If the stiffener is damaged, replace it together with the panel.
- The spare part for the panel provided with the stiffener has a sheet-type stiffener affixed.