Inspection Procedure 15

INSPECTION PROCEDURE 15: Oil leaks from the air breather.

TROUBLESHOOTING HINTS (THE MOST LIKELY CAUSES FOR THIS CONDITION:)

- Poor adjustment of the transmission fluid level

- A/T failure: Driving force transmission system

DIAGNOSIS

STEP 1. Check the transmission fluid.

Check the transmission fluid for burning, fouling, and foreign material.

Q. Is the check result normal?

YES Go to Step 2.
NO Replace the transaxle assembly.
STEP 2. Check the transmission fluid level.

Check if the transmission fluid level is adequate.

Q. Is the check result normal?

YES Go to Step 3.
NO Check and repair the leakage point of the transmission fluid, add the transmission fluid, and then go to Step 3 .
STEP 3. Perform a hydraulic test.

Refer to Hydraulic Pressure Test.

Q. Is the check result normal?

YES The procedure is complete.
NO Replace the transaxle assembly.