Transfer Oil Change

TRANSFER OIL REPLACEMENT













1. Remove the drain plug and gasket, to drain the transfer oil.
2. Install the drain plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 Nm (24 ± 1 ft-lb)
3. Remove the filler plug and gasket, and fill the transfer oil up to the lower edge of the filler plug hole.

Brand name: Hypoid gear oil API classification GL-5 SAE80
Filling amount: 0.49 dm3 (0.52 quarts)
4. Install the filler plug and a new gasket, and tighten them to the specified torque.
Tightening torque: 32 ± 2 Nm (24 ± 1 ft-lb)