Overhaul

DISASSEMBLY AND REASSEMBLY









REASSEMBLY SERVICE POINTS

]]A[[ SLIDING ROOF HOUSING FRAME No.1 REASSEMBLY





CAUTION:
Before installing the sliding roof housing frame No.1, clean up the shaded area shown in the figure. If you fail to do so, the sliding roof No.1 trim sub assembly, sliding roof No.2 trim sub assembly, or sliding roof No.3 trim sub assembly may get dirty when installing them.

]]B[[SLIDING ROOF No.1 TRIM SUB ASSEMBLY/SLIDING ROOF No.2 TRIM SUB ASSEMBLY REASSEMBLY

1. Install the sliding roof No.1 trim sub assembly to the sliding roof housing frame No.1.

CAUTION:
Attach the hooks of the sliding roof No.1 trim sub assembly to the sliding roof No.2 trim sub assembly securely. If the hooks are not attached securely, the assemblies will be dislocated when the sunshade lid is operated.

2. Attach the hooks of the sliding roof No.1 trim sub assembly to the sliding roof No.2 trim sub assembly.

CAUTION:
Attach the hooks of the sliding roof No.2 trim sub assembly to the sliding roof No.3 trim sub assembly securely. If the hooks are not attached securely, the assemblies will be dislocated when the sunshade lid is operated.

3. Attach the hooks of the sliding roof No.2 trim sub assembly to the sliding roof No.3 trim sub assembly.

4. Install the drive cable of the sliding roof housing frame No.1 to the joint of the sliding roof No.1 trim sub assembly from the front side of the vehicle.