Seals and Gaskets: Service and Repair

DIFFERENTIAL CARRIER OIL SEAL REPLACEMENT

Required Special Tools:

- MB990938: Installer Bar
- MB991115: Oil Seal Installer


1. Remove the driveshaft.(Refer to Rear Axle.)

2. Remove the differential carrier oil seal.





3. Use special tools MB990938 and MB991115 to press-fit a new oil seal.
4. Apply multi-purpose grease to the oil seal lip and driveshaft oil seal seating area.
5. Replace the drive shaft circlip with a new one, and install the driveshaft. (Refer to Rear Axle.)