DTC 23

DTC 23: ECM and Its Related Component.

DTC SET CONDITIONS

This DTC is set when there is failure in the ECM and its related components.

TROUBLESHOOTING HINTS (THE MOST LIKELY CAUSES FOR THIS CASE:)

- Malfunction of the MFI system.
- Malfunction of the ECM.

DIAGNOSTIC PROCEDURE

STEP 1. Using scan tool MB991958, check for MFI system DTC.

(1)
CAUTION:
To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958.

Connect scan tool MB991958 to the data link connector (Refer to Reading and Clearing Diagnostic Trouble Codes).

(2)Turn the ignition switch to the "ON" position.

(3)Set scan tool MB991958 to check for MFI system DTC Reading and Clearing Diagnostic Trouble Codes).

Q. Is any DTC set?

YES Repair the MFI system Multiport Fuel Injection (MFI).) Then go to Step 3.
NO Go to Step 2.
STEP 2. Read the cruise control system DTC.

(1)Disconnect the negative (-) battery terminal, to erase the DTC of the cruise control system.

(2)Connect the negative (-) battery terminal.

(3)Turn the ignition switch to the "ON" position, and press the "ON/OFF" switch to turn the cruise control system to ON (turn on the "CRUISE" indicator light).

(4)After turning the cruise control system to ON, when 2 minutes or more has elapsed without operating the cruise control switches, read the DTC of the cruise control system (Refer to Reading and Clearing Diagnostic Trouble Codes.)

Q. Is DTC 23 set?

YES Replace the ECM [ Removal and Replacement.] Then go to Step 3.
NO It can be assumed that this malfunction is intermittent How to Cope With Intermittent Malfunctions).
STEP 3. Read the cruise control system DTC.

(1)Disconnect the negative (-) battery terminal, to erase the DTC of the cruise control system.

(2)Connect the negative (-) battery terminal.

(3)Turn the ignition switch to the "ON" position, and press the "ON/OFF" switch to turn the cruise control system to ON (turn on the "CRUISE" indicator light).

(4)After turning the cruise control system to ON, when 2 minutes or more has elapsed without operating the cruise control switches, read the DTC of the cruise control system (Refer to Reading and Clearing Diagnostic Trouble Codes).

Q. Is DTC 23 set?

YES Return to Step 1.
NO The procedure is complete.