System Description (For USA)

The headlamps are controlled by the lighting switch which is built into the combination switch.
Power is supplied at all times
- to lighting switch terminal 5
- through 15 A fuse (No. 59, located in the fuse and fusible link box), and
- to lighting switch terminal 8
- through 15 A fuse (No. 60, located in the fuse and fusible link box).

LOW BEAM OPERATION
When the lighting switch is turned to the 2ND position and placed in LOW ("B") position, power is supplied
- from lighting switch terminal 10
- to terminal 2 of the LH headlamp, and
- from lighting switch terminal 7
- to terminal 2 of the RH headlamp.
Terminal 3 of each headlamp supplies ground through body grounds E13 and E41.
With power and ground supplied, the headlamp(s) will illuminate.

HIGH BEAM OPERATION/FLASH-TO-PASS OPERATION
When the lighting switch is turned to the 2ND position and placed in HIGH ("A") position or PASS ("C") position, power is supplied
- from lighting switch terminal 6
- to terminal 1 of each RH headlamp, and
- from lighting switch terminal 9
- to terminal 1 of each LH headlamp, and
- to combination meter terminal 33 for the high beam indicator.
Ground is supplied to terminal 19 of the combination meter through body grounds M4 and M77. Terminal 3 of each headlamp supplies ground through body grounds E13 and E41.
With power and ground supplied, the high beams and the high beam indicator illuminate.

THEFT WARNING SYSTEM
The theft warning system will flash the high beams if the system is triggered.