Headlamp (Plastic) - Cloudy/Hazy Appearance
Classification:ELO2-005
Reference:
NTB02-053
Date:
May 3, 2002
PLASTIC HEADLAMP LENS CLEANER
APPLIED VEHICLES:
All Nissan vehicles with plastic headlamp lenses
SERVICE INFORMATION
This bulletin introduces 3M Plastic Polish(TM) # 39010, which should be used to clean and polish headlamps with cloudy, hazy, or other poor appearance.
SERVICE PROCEDURE
Use 3M Plastic Polish(TM) (# 39010) to polish the headlamp lens(es) as follows:
1. Remove any dust, dirt, or debris from the headlamp lens using a soft damp cloth.
2. Dispense a quarter-size drop of 3M Plastic Polish(TM) onto a clean, dry, soft, cotton terry cloth towel (see Figure 1a).
3. Apply the polish to the lens using a firm, circular motion (see Figure 1b).
4. Rub until dry.
5. Use a clean, dry section of cloth to remove the haze.
6. Repeat as necessary.
NOTES:
^ Material Safety Data Sheets (MSDS) for 3M Plastic Polish(TM) # 39010 are available via fax or email by calling 3M's 24-hour "3M Helps" Customer Service line at 1-800-364-3577 OR (651) 737-6501.
^ This 3M product can be locally sourced through the following distributors:
R.S. Hughes - 1-877-774-8443
Granger Industrial Supplies - 1-800-323-0620