Fuel Filter: Service and Repair

WARNING: Before removing fuel filter, release fuel pressure from fuel line.

With CONSULT
1. Start engine.




2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode to release fuel pressure to zero.
3. After engine stalls, crank engine two or three times to make sure that fuel pressure is released.
4. Turn ignition switch "OFF".

Without Tools




1. Remove fuel pump fuse.
2. Start engine.
3. After engine stalls, crank engine two or three times to make sure that fuel pressure is released.
4. Turn ignition switch "OFF" and install fuel pump fuse.




5. Loosen fuel hose clamps.
6. Replace fuel filter.

CAUTION: Be careful not to spill fuel over engine compartment. Place a shop towel to absorb fuel.

NOTE: Use a high-pressure type fuel filter. Do not use a synthetic resinous fuel filter.