ABS/ABLS Control Unit Power and Ground Systems Inspection

ABS/ABLS Control Unit Power and Ground Systems Inspection

INSPECTION PROCEDURE





1. SELF-DIAGNOSIS RESULT CHECK
Check self-diagnosis results.
Is the above displayed in the self-diagnosis display items?
YES >> GO TO 2.
NO >> Inspection End.
2. CONNECTOR INSPECTION
1. Disconnect the ABS actuator and electric unit (control unit) connector E125.
2. Check the terminals for deformation, disconnection, looseness or damage.
OK or NG
OK >> GO TO 3.
NG >> Repair or replace as necessary.
3. ABS/ABLS CONTROL UNIT POWER AND GROUND CIRCUIT INSPECTION





Measure the voltage and continuity between the ABS actuator and electric unit (control unit) harness connector E125 and body ground.
OK or NG
OK >> Check the battery for loose terminals, low voltage, etc. Repair as necessary
NG >> Repair the circuit.