In P Position, Vehicle Moves When Pushed

In P Position, Vehicle Moves When Pushed

SYMPTOM: Even though the selector lever is set in the "P" position, the parking mechanism is not actuated, allowing the vehicle to be moved when it is pushed.

DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-88, "SELF-DIAGNOSTIC RESULT MODE". With Manufacturer's Scan Tool
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >> GO TO 2.
2. CHECK CONTROL CABLE
Check the control cable.
^ Refer to "Checking of A/T Position".
OK or NG
OK >> GO TO 3.
NG >> Adjust control cable. Refer to "Adjustment of A/T Position".
3. CHECK A/T FLUID CONDITION
1. Remove oil pan. Refer to "Control Valve With TCM and A/T Fluid Temperature Sensor 2".
2. Check A/T fluid condition. Refer to "Fluid Condition Check".
OK or NG
OK >> INSPECTION END
NG >> GO TO 4.
4. DETECT MALFUNCTIONING ITEM
^ Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to "Symptom Chart" (Symptom No.58).
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.