Exhaust Manifold

Exhaust Manifold





(LEFT BANK)
^ If stud bolts were removed, install them and tighten to the specified torque.
Exhaust manifold stud torque 14.7 Nm (1.5 kgf-m, 11 ft. lbs.)





^ Install exhaust manifold and tighten nuts in numerical order as shown.

NOTE: Tighten nuts No. 1 and 2 in two steps. The numerical order No. 7 and 8 shown second step.

(RIGHT BANK)
Installation of the remaining components is in the reverse order of removal. Note the following:

^ If stud bolts were removed, install them and tighten to the specified torque.
Exhaust manifold stud torque 14.7 Nm (1.5 kgf-m, 11 ft. lbs.)





^ Install exhaust manifold and tighten nuts in numerical order as shown.

NOTE: Tighten nuts No. 1 and 2 in two steps. The numerical order No. 7 and 8 shown second step.