Timing Components: Specifications

Timing Chain Tensioner








Timing Cover





Tighten bolts to the specified torque in numerical order as shown.
^ There are four type of bolts. Refer to the following for locating bolts.
Bolt diameter: Bolt position
1-5 10 mm (0.39 inch)
6-25 6 mm (0.24 inch)
Bolt position: Tightening specification
1-5 55.0 Nm (5.6 kgf-m, 41 ft. lbs.)
6-25 12.7 Nm (1.3 kgf-m, 9 ft. lbs.)
After all bolts tightened, retighten them to the specified torque in numerical order as shown.

Crankshaft Pulley
Tighten crankshaft pulley bolt in two steps.
Step 1 44.1 Nm (4.5 kgf-m, 33 ft. lbs.)
Step 2 84° - 90° degrees clockwise