Inspection After Disassembly

INSPECTION AFTER DISASSEMBLY
Case





Check the contact surfaces of the shift rod and bearing for wear and damage. If any is found, replace with a new one.

Sleeve





Check the items below. If necessary, replace them with new ones.
^ Damage and excessive wear of the contact surfaces of the sprocket, mainshaft and sleeve.
^ Sleeve must move smoothly

Gear, Shaft and Drive Chain





Check the items below. If necessary, replace them with new ones.
^ Damage, peeling, uneven wear and bending of the shaft.
^ Excessive wear, damage and peeling of the gear.

Bearing





Check the bearing for damage and rough rotation. If necessary, replace it with a new one.